The current stage in aerospace at the end of 2020

Main Article Content

Relly Victoria Virgil Petrescu
Dr. Florian Ion Tiberiu Petrescu
صندلی اداری

Abstract

The paper briefly presents some models of aircraft considered avant-garde in 2020, and it is part of the reviews on news in aviation and aerospace. It briefly presents some basic features, news, and more important data for each new model on display, so that the reader can get an image of that model but also an overall one, to compare different models from a particular manufacturer with each other, as well as with those belonging to another manufacturer. Aircraft manufacturers are constantly concerned with modifying their aircraft and building other new models that meet customer requirements as much as possible, but at the same time lead to reductions in total fuel consumption used in flight, to reduce pollution due to flights and the negative effects on planetary ecosystems, as well as the increase in the quality and safety of air travel.

Downloads

Download data is not yet available.

Article Details

Section
Articles
Author Biography

Dr. Florian Ion Tiberiu Petrescu, IFToMM

IFToMM

References

Abdullah E. M., Darwish, R. R., & Bassiuny, A. M. (2019). New Model-Based Fault Detection Approach using Black Box Observer. Journal of Mechatronics and Robotics, 3(1), 42-51. DOI: https://doi.org/10.3844/jmrsp.(2019).42.51

Anderson, S. B. (1997). Historical Overview of V / STOL Aircraft Technology. NASA Technical Memorandum 81280. https://ntrs.nasa.gov/citations/20020051099

Andrés G. García, (2020). Asymptotic Stability of Unicycle-Like Robots: The Bessel’s Controller. Journal of Mechatronics and Robotics, 4(1), 1-7. DOI: https://doi.org/10.3844/jmrsp.(2020).1.7

Antonescu, P., & Petrescu, F. (1985). Analytical method of synthesis of cam mechanism and flat stick. In Proceedings of the 4th International Symposium on Theory and Practice of Mechanisms,(TPM’89), Bucharest.

Antonescu, P., & Petrescu, F. (1989). Contributions to cinetoelastodynamic analysis of distribution mechanisms. In Proceedings of the 4th International Symposium on Theory and Practice of Mechanisms,(TPM’89), Bucharest.

Antonescu, P., Oprean, M., & Petrescu, F. (1985a). Contributions to the synthesis of oscillating cam mechanism and oscillating flat stick. In Proceedings of the 4th International Symposium on Theory and Practice of Mechanisms,(TPM’85), Bucharest.

Antonescu, P., Oprean, M., & Petrescu, F. (1985b). At the projection of the oscillate cams, there are mechanisms and distribution variables. In Proceedings of the V-Conference for Engines, Automobiles, Tractors and Agricultural Machines, I-Engines and Automobiles,Conference (AMA’85), Brasov.

Antonescu, P., Oprean, M., & Petrescu, F. (1986). Projection of the profile of the rotating camshaft acting on the oscillating plate with disengagement. In Proceedings of the 3rd National Computer-aided Design Symposium in the field of Mechanisms and Machine Parts, (MMP’86), Brasov.

Antonescu, P., Oprean, M., & Petrescu, F. (1987). Dynamic analysis of the cam distribution mechanisms. In Proceedings of the 7th National Symposium on Industrial Robots and Space Mechanisms,(RSM’87), Bucharest.

Antonescu, P., Oprean, M., & Petrescu, F. (1988). Analytical synthesis of Kurz profile, rotating the flat cam. Mach, Build. Rev.

Antonescu, P., Petrescu, F., & Antonescu, O. (1994). Contributions to the synthesis of the rotating cam mechanism and the tip of the balancing tip.

Antonescu, P., Petrescu, F., & Antonescu, D. (1997). Geometrical synthesis of the rotary cam and balance tappet mechanism. Bucharest, 3, 23-23. In Proceedings of the International Symposium on Theory and Practice of Mechanisms,(TPM’89), Bucharest.

Antonescu, P., Petrescu, F., & Antonescu, O. (2000a). Contributions to the synthesis of the rotary disc-cam profile. In Proceedings of the 8th International Conference on the Theory of Machines and Mechanisms, (TMM’00), Liberec, Czech Republic (pp. 51-56).

Antonescu, P., Petrescu, F., & Antonescu, O. (2000b). Synthesis of the rotary cam profile with balance follower. In Proceedings of the 8th Symposium on Mechanisms and Mechanical Transmissions,(MMT’00), Timişoara (pp. 39-44).

Antonescu, P., Petrescu, F., & Antonescu, O. (2001). Contributions to the synthesis of mechanisms with rotary disc-cam. In Proceedings of the 8th IFToMM International Symposium on Theory of Machines and Mechanisms, Bucharest, ROMANIA (pp. 31-36).

Anurag Dwivedi, Dhananjay Kumar, & Nitesh Tiwari, (2019a). A Review on Electric Traction using WE System. Journal of Mechatronics and Robotics, 3(1), 122-128. DOI: https://doi.org/10.3844/jmrsp.(2019).122.128

Anurag Dwivedi, Pooja Rajbhar, & Nitesh Tiwari, (2019b). Long Distance Power Transfer Technique: A Review. Journal of Mechatronics and Robotics, 3(1), 208-214. DOI: https://doi.org/10.3844/jmrsp.(2019).208.214

Aversa, R., Petrescu, R. V., Apicella, A., & Petrescu, F. I. (2017a). Nano-diamond hybrid materials for structural biomedical application. American Journal of Biochemistry and Biotechnology, 13(1), 34-41.

Aversa, R., Petrescu, R. V., Akash, B., Bucinell, R., Corchado, J., Chen, G., ... & Petrescu, F. I. (2017b). Kinematics and forces to a new model forging manipulator. American Journal of Applied Sciences, 14(1), 60-80.

Aversa, R., Petrescu, R. V., Apicella, A., Petrescu, F. I., Calautit, J. K., Bucinell, R., & Akash, B. (2017c). Something about the V engines design. American Journal of Applied Sciences, 14(1), 34-52.

Aversa, R., Parcesepe, D., Petrescu, R. V., Berto, F., Chen, G., Petrescu, F. I., ... & Apicella, A. (2017d). Processability of bulk metallic glasses. American Journal of Applied Sciences, 14(2), 294-301.

Aversa, R., Petrescu, F. I., Petrescu, R. V., & Apicella, A. (2016a). Biomimetic finite element analysis bone modeling for customized hybrid biological prostheses development. American Journal of Applied Sciences, 13(11), 1060-1067.

Aversa, R., Parcesepe, D., Petrescu, R. V. V., Chen, G., Petrescu, F. I. T., Tamburrino, F., & Apicella, A. (2016b). Glassy amorphous metal injection molded induced morphological defects. American Journal of Applied Sciences.

Aversa, R., Petrescu, R. V., Petrescu, F. I., & Apicella, A. (2016c). Smart-factory: Optimization and process control of composite centrifuged pipes. American Journal of Applied Sciences, 13(11), 1330-1341.

Aversa, R., Tamburrino, F., Petrescu, R. V., Petrescu, F. I., Artur, M., Chen, G., & Apicella, A. (2016d). Biomechanically inspired shape memory effect machines driven by muscle like acting NiTi alloys. American Journal of Applied Sciences, 13(11), 1264-1271.

Ayiei, A., (2020). The Use of Eye Tracking in Assessing Visual Attention, Journal of Aircraft and Spacecraft Technology, 4(1), 117-124. DOI: https://doi.org/10.3844/jastsp.(2020).117.124

Babu, K. V., Rao, A. S., Kumar, K. N., & Rao, M. V. (2019). Spectral and luminescence properties of manganese doped sodium lead alumino borosilicate glass system. Journal of Aircraft and Spacecraft Technology, 3(1), 248-255.

Babu, K. V., Subba Rao, A., Madhuri, V., & Suresh, K. (2020). White light generation in Dy3+-doped sodium lead alumino borosilicate glasses for W-LED applications. Journal of Aircraft and Spacecraft Technology 4(1), 39-47.

Bennacer El Hassouni, Haddi, A., & Amrani, A. G., (2019). Critical Study of Several MPPT Techniques for Photovoltaic Systems. Journal of Mechatronics and Robotics, 3(1), 269-279. DOI: https://doi.org/10.3844/jmrsp.(2019).269.279

Brewer, G. D. (1991). Hydrogen aircraft technology. CRC press.

Brischetto, S., & Torre, R. (2020). Honeycomb Sandwich Specimens Made of PLA and Produced Via 3D FDM Printing Process: An Experimental Study. Journal of Aircraft and Spacecraft Technology 4(1).

Cao, W., Ding, H., Zi, B., & Chen, Z. (2013). New structural representation and digital-analysis platform for symmetrical parallel mechanisms. International Journal of Advanced Robotic Systems, 10(5), 243.

Chaudhary, S., & Kumar, A. (2019). Control of twin rotor MIMO system using PID and LQR controller. Journal of Aircraft and Spacecraft Technology, 3(1), 211-220.

Christina Hertel, (2017). 10 questions you always wanted to ask a pilot. https://www.vice.com/ro/article/ne7va8/intrebari-pilot-curiozitati

Council of the European Union, Policies. Drone: aviation safety reform in the EU. Council of the European Union, Policies https://www.consilium.europa.eu/ro/policies/drones/

Cristian Eremia, (2020). Has the era of air drone wars finally settled? Defense and Security Monitor. https://monitorulapararii.ro/epoca-razboaielor-dronelor-aeriene-s-a-instalat-definitiv-1-31794

De Mota Siqueira, R. H., Atilio, I., De Andrade Ferreira, C. C., De Carvalho, S. M., & De Lima, M. S. F. (2020). Fiber Laser Beam Welding Between Niobium and Titanium. Journal of Aircraft and Spacecraft Technology. 4(1), 21-25. DOI: https://doi.org/10.3844/jastsp.(2020).21.25

Dekkata, S. C., & Sun Yi, (2019). Improved Steering and Adaptive Cruise Control for Autonomous Vehicles Using Model Predictive Control. Journal of Mechatronics and Robotics, 3(1), 378-388. DOI: https://doi.org/10.3844/jmrsp.(2019).378.388

Devi Chilukuri, Sun Yi, & Younho Seong, (2019). Computer Vision for Vulnerable Road Users using Machine Learning. Journal of Mechatronics and Robotics, 3(1), 33-41. DOI: https://doi.org/10.3844/jmrsp.(2019).33.41

Dong, H., Giakoumidis, N., Figueroa, N., & Mavridis, N. (2013). Approaching behaviour monitor and vibration indication in developing a General Moving Object Alarm System (GMOAS). International Journal of Advanced Robotic Systems, 10(7), 290.

December 2012. Drone - the "eye of heaven" that sees everything. Descopera.ro. https://descopera.ro/stiinta/9249085-drona-ochiul-din-cer-care-vede-tot

Fahim, S. R., Dey, S., Rashiduzzaman, Md., Sarker, S. K., Badal, F. R., & Das, S. K. (2019). Development of an Android Recognition Open-Loop Tracking Control of Writing Robotic Arm. Journal of Mechatronics and Robotics, 3(1), 521-533. DOI: https://doi.org/10.3844/jmrsp.(2019).521.533

Garfo, S., Muktadir, M. A., & Sun Yi, (2020). Defect Detection on 3D Print Products and in Concrete Structures Using Image Processing and Convolution Neural Network. Journal of Mechatronics and Robotics, 4(1), 74-84. DOI: https://doi.org/10.3844/jmrsp.(2020).74.84

Hanrahan, J. (2014). Drone Attack Survival Guide could save your life. https://www.vice.com/ro/article/53p4xz/ghidul-de-supravietuire-a-atacurilor-cu-drone-ti-ar-putea-salva-viata

He, B., Wang, Z., Li, Q., Xie, H., & Shen, R. (2013). An analytic method for the kinematics and dynamics of a multiple-backbone continuum robot. International Journal of Advanced Robotic Systems, 10(1), 84.

Kisabo, A. B., Adebimpe, A. F., & Samuel, S. O. (2019a). Pitch Control of a Rocket with a Novel LQG/LTR Control Algorithm. Journal of Aircraft and Spacecraft Technology.

Kisabo, A. B., Nwokolo, N., Adebimpe, A. F., & Samuel, S. O. (2019b). Novel Approach for Characterizing Solid Rocket Motor (SRM). Journal of Aircraft and Spacecraft Technology.

Kisabo, A. B., & Adebimpe, A. F. (2019). State-Space Modeling of a Rocket for Optimal Control System Design. In Ballistics. IntechOpen. Journal of Aircraft and Spacecraft Technology.

Komakula, S. A. (2019). Optimization of Inverse Kinematic Solution of a T4R Robotic Manipulator. Journal of Mechatronics and Robotics, 3(1), 258-268. DOI: https://doi.org/10.3844/jmrsp.(2019).258.268

Kortam, M. A., Tolba, F. A., & Hassen, A. M. A. (2018). Development of a Mechatronic Control System for a Mechanical Fuel Injection System of a Four-Cylinder Automotive Diesel Engine By using Matlab and Simulink. Journal of Mechatronics and Robotics, 2(1), 60-71. DOI: https://doi.org/10.3844/jmrsp.2018.60.71

Kosambe, S. (2019a). NASA’s exploration missions to the red planet. Journal of Aircraft and Spacecraft Technology. 3(1), 154-171.

Kosambe, S. (2019b). Mission Shakti aka Project XSV-1: India’s First Anti-Satellite Test (ASAT). Journal of Aircraft and Spacecraft Technology.

Kosambe, S. (2019c). Overview of Space Debris Mitigation Activities in ISRO. Journal of Aircraft and Spacecraft Technology.

Kosambe, S. (2019d). Chandrayaan-2: India’s second lunar exploration mission. Journal of Aircraft and Spacecraft Technology, 3(1), 221-236.

Kumar, V. N., & Sreenivasulu, R. (2019). Inverse Kinematics (IK) Solution of a Robotic Manipulator using PYTHON. Journal of Mechatronics and Robotics, 3(1), 542-551. DOI: https://doi.org/10.3844/jmrsp.(2019).542.551

Langston, L. S. (2016). Hot Plates. Mechanical Engineering, 138(03), 42-47.

Langston, L. S. (2015). Gas Turbines-Major Greenhouse Gas Inhibitors. Mechanical Engineering, 137(12), 54-55.

Lee, B. J. (2013). Geometrical derivation of differential kinematics to calibrate model parameters of flexible manipulator. International Journal of Advanced Robotic Systems, 10(2), 106.

Lin, W., Li, B., Yang, X., & Zhang, D. (2013). Modelling and control of inverse dynamics for a 5-DOF parallel kinematic polishing machine. International Journal of Advanced Robotic Systems, 10(8), 314.

Liu, H., Zhou, W., Lai, X., & Zhu, S. (2013). An efficient inverse kinematic algorithm for a PUMA560-structured robot manipulator. International Journal of Advanced Robotic Systems, 10(5), 236.

Mackenzie T. M., & Sun Yi, (2019). Adaptive and Neural Network Based Control of Pitch of Unmanned Aerial Vehicles. Journal of Mechatronics and Robotics, 3(1), 571-588. DOI: https://doi.org/10.3844/jmrsp.(2019).571.588

Mishra, A. (2020a). Image Processing of Friction Stir Welded 6060-T5 Aluminum Alloy Joint. Journal of Aircraft and Spacecraft Technology., 4(1), 48-53. DOI: https://doi.org/10.3844/jastsp.(2020).48.53

Mishra, A. (2020b). Machine Learning Approach for Defects Identification in Dissimilar Friction Stir Welded Aluminium Alloys AA 7075-AA 1100 Joints. Journal of Aircraft and Spacecraft Technology., 4(1), 88-95. DOI: https://doi.org/10.3844/jastsp.(2020).88.95

Mishra, A. & Sarawagi, R. (2020). Local Binary Pattern for the Evaluation of Surface Quality of Dissimilar Friction Stir Welded Ultrafine Grained 1050 and 6061-T6 Aluminium Alloys. Journal of Mechatronics and Robotics, 4(1), 106-112. DOI: https://doi.org/10.3844/jmrsp.(2020).106.112

Nacy, S. M. & Nayif, A. A. (2018). Effect of Object Size and Location on Contact Forces and Grasping Stability for an Underactuated Robotic Manipulator. Journal of Mechatronics and Robotics, 2(1), 72-84. DOI: https://doi.org/10.3844/jmrsp.2018.72.84

Oni, M. O., & Jha, B. K. (2019). Heat Generation/absorption effect on natural convection flow in a vertical annulus with time-periodic boundary conditions. Journal of Aircraft and Spacecraft Technology, 3(1), 183-196.

Padula, F., & Perdereau, V. (2013). An on-line path planner for industrial manipulators. International Journal of Advanced Robotic Systems, 10(3), 156.

Perumaal, S. S., & Jawahar, N. (2013). Automated trajectory planner of industrial robot for pick-and-place task. International Journal of Advanced Robotic Systems, 10(2), 100.

Petrescu, F., & Petrescu, R. (1997a). Dynamics of cam mechanisms (exemplified on the classic distribution mechanism). SYROM1997. Bucharest, 3, 353-358.

Petrescu, F., & Petrescu, R. (1997b). Contributions to the synthesis of the distribution mechanisms of internal combustion engines with a Cartesian coordinate method. SYROM1997. Bucharest, 3, 359-364.

Petrescu, F., & Petrescu, R. (1997c). Contributions to maximizing polynomial laws for the active stroke of the distribution mechanism from internal combustion engines. SYROM1997. Bucharest, 3, 365-370.

Petrescu, F., & Petrescu, R. (2000a). Synthesis of distribution mechanisms by the rectangular (Cartesian) coordinate method. University of Craiova, Craiova.

Petrescu, F., & Petrescu, R. (2000b). The design (synthesis) of cams using the polar coordinate method (triangle method). University of Craiova, Craiova.

Petrescu, F., & Petrescu, R. (2002a). Motion laws for cams. In Proceedings of the International Computer Assisted Design, National Symposium with Participation,(SNP'02), Braşov (pp. 321-326).

Petrescu, F., & Petrescu, R. (2002b). Camshaft dynamics elements. In Proceedings of the International Computer Assisted Design, National Participation Symposium,(SNP'02), Braşov (pp. 327-332).

Petrescu, F., & Petrescu, R. (2003). Some elements regarding the improvement of the engine design. In Proceedings of the National Symposium, Descriptive Geometry, Technical Graphics and Design,(GTD'03), Braşov (pp. 353-358).

Petrescu, F., & Petrescu, R. (2011a). Mechanical Systems, Serial and Parallel. Lulu. com.

Petrescu, F. I., & Petrescu, R. V. (2005a). The cam design for a better efficiency. Available at SSRN 3076805.

Petrescu, F. I., & Petrescu, R. V. (2005b, September). Contributions at the Dynamic of Cams. In The Ninth IFTOMM International Symposium on Theory of Machines and Mechanisms.

Petrescu, F. I., & Petrescu, R. V. (2005c). Determining the dynamic efficiency of cams. Available at SSRN 3076802.

Petrescu, F. I., & Petrescu, R. V. (2005d). An original internal combustion engine. In The Ninth IFTOMM International Symposium on Theory of Machines and Mechanisms.

Petrescu, F. I., & Petrescu, R. V. (2011c). Determination of the Mechanical Efficiency of the Gears. Ingineria Automobilului, (19), 22-23.

Petrescu, F. I., & Petrescu, R. V. (2013b). Cams with high efficiency. Int. Rev. Mech. Eng, 7(4), 599-606.

Petrescu, F. I., & Petrescu, R. V. (2013d). Dynamic synthesis of the rotary cam and translated tappet with roll. Engevista, 15(3).

Petrescu, F. I., & Petrescu, R. V. (2013e). Forces and efficiency of cams. Int. Rev. Mech. Eng, 7(3), 507-511.

Petrescu, F. I., & Petrescu, R. V. (2014h). Cam Dynamic Synthesis. Al-Khwarizmi Engineering Journal, 10(1), 1-23.

Petrescu, F. I., & Petrescu, R. V. (2016c). Dynamic cinematic to a structure 2R. GEINTEC Journal, 6(2).

Petrescu, F. I., & Calautit, J. K. (2016a). About nano fusion and dynamic fusion. American Journal of Applied Sciences, 13(3).

Petrescu, F. I., & Calautit, J. K. (2016b). About the light dimensions. American Journal of Applied Sciences, 13(3).

Petrescu, F. I. T., & Petrescu, R. V. V. (2014a). High efficiency gear. Facta Universitatis, Series: Mechanical Engineering, 12(1), 51-60.

Petrescu, F. I., & Petrescu, R. V. (2014b). Cam gears dynamics in the classic distribution. Independent Journal of Management & Production (IJM&P), 5(1).

Petrescu, F. I., & Petrescu, R. V. (2014c). High efficiency gears synthesis by avoid the interferences. Independent Journal of Management & Production (IJM&P), 5(2).

Petrescu, F. I., Grecu, B., Comanescu, A., & Petrescu, R. V. (2009). Some mechanical design elements. In The 3rd International Conference on Computational Mechanics and Virtual Engineering COMEC (pp. 29-30).

Petrescu, F. I., Apicella, A., Petrescu, R. V., Kozaitis, S., Bucinell, R., Aversa, R., & Abu-Lebdeh, T. (2016). Environmental protection through nuclear energy. American Journal of Applied Sciences, 13(9), 941-946.

Petrescu, F. I. T., (2011). Teoria Mecanismelor si a Masinilor: Curs Si Aplicatii. 1st Edn., CreateSpace Independent Publishing Platform. ISBN-10: 1468015826. pp: 432.

Petrescu, F. I. T., & Petrescu, R. V. (2011b). Trenuri planetare. Createspace Independent Pub, 104.

Petrescu, F. I. T., & Petrescu, R. V. (2013c). An algorithm for setting the dynamic parameters of the classic distribution mechanism. Int. Rev. Modell. Simulat, 6, 1637-1641.

Petrescu, F. I. T., & Petrescu, R. V. (2014d). Balancing otto engines. Int. Rev. Mech. Eng, 8, 473-480.

Petrescu, F. I. T., & Petrescu, R. V. (2014e). Machine equations to the classical distribution. Int. Rev. Mech. Eng, 8, 309-316.

Petrescu, F. I. T., & Petrescu, R. V. (2014f). Forces of internal combustion heat engines. Int. Rev. Modell. Simulat, 7, 206-212.

Petrescu, F. I. T., & Petrescu, R. V. (2014g). Determination of the yield of internal combustion thermal engines. Int. Rev. Mech. Eng, 8, 62-67.

Petrescu, F. I. T., Petrescu, R. V. (2017x). The computer algorithm for machine equations of classical distribution. Journal of Materials and Engineering Structures «JMES», 4(4), 193-209.

Petrescu, F. I. T., & Petrescu, R. V. V. (2019a). An algorithm to determining the gear efficiency to a simple planetary train. Independent Journal of Management & Production, 10(5), 1392-1404.

Petrescu, F. I. T., & Petrescu, R. V. V. (2019c). Application to rigid memory mechanisms of a variable internal dynamic damping model. Independent Journal of Management & Production, 10(6), 1994-2022.

Petrescu, F. I. T. (2019i). About the nuclear particles’ structure and dimensions. Computational Particle Mechanics, 6(2), 191-194.

Petrescu, N., & Petrescu, F. I. T. (2019d). The Yield of the Thermal Engines. Journal of Mechatronics and Robotics., 3(1), 215-236. DOI: https://doi.org/10.3844/jmrsp.(2019).215.236

Petrescu, N., & Petrescu, F. I. T. (2019e). Machine Motion Equations Presented in a New General Format. Journal of Mechatronics and Robotics, 3(1), 344-377. DOI: https://doi.org/10.3844/jmrsp.(2019).344.377

Petrescu, N., & Petrescu, F. I. T. (2019f). New About the Balancing of Thermal Motors. Journal of Mechatronics and Robotics, 3(1), 471-496. DOI: https://doi.org/10.3844/jmrsp.(2019).471.496

Petrescu, N., Aversa, R., Apicella, A., & Petrescu, F. I. (2018h). A New Exoplanet Reveals its Identity. Nicolae Petrescu et al./Journal of Aircraft and Spacecraft Technology, 2, 85-96.

Petrescu, N., Aversa, R., Apicella, A., & Petrescu, F. I. (2018i). New Researches Examines the Wing Shapes to Reduce Vortex and Wake. Journal of Aircraft and Spacecraft Technology, 2, 97-110.

Petrescu, N., Aversa, R., Apicella, A., & Petrescu, F. I. T. (2018v). Something about Robots Today. Journal of Mechatronics and Robotics, 2(1), 85-104. DOI: https://doi.org/10.3844/jmrsp.2018.85.104

Petrescu, N., Aversa, R., Apicella, A., & Petrescu, R. V. V. (2018w). Structural-Topological Synthesis of Planar Mechanisms with Rods and Wheels. Journal of Mechatronics and Robotics, 2(1), 105-120. DOI: https://doi.org/10.3844/jmrsp.2018.105.120

Petrescu, R. V., & Petrescu, F. I. (2005e). Determining the mechanical efficiency of Otto engine’s mechanism. Available at SSRN 3076804.

Petrescu, R. V., & Petrescu, F. I. (2019b). Structural-Topological Synthesis of Space Mechanisms With Rods and Wheels. Independent Journal of Management & Production (IJM&P), 10.

Petrescu, R. V., Aversa, R., Akash, B., Bucinell, R., Corchado, J., Apicella, A., & Petrescu, F. I. (2017a). Modern propulsions for aerospace-a review. Journal of Aircraft and Spacecraft Technology, 1(1).

Petrescu, R. V., Aversa, R., Akash, B., Bucinell, R., Corchado, J., Apicella, A., & Petrescu, F. I. (2017b). Modern propulsions for aerospace-part II. Journal of Aircraft and Spacecraft Technology, 1(1).

Petrescu, R. V., Aversa, R., Akash, B., Bucinell, R., Corchado, J., Apicella, A., & Petrescu, F. I. (2017c). History of aviation-a short review. Journal of Aircraft and Spacecraft Technology, 1(1).

Petrescu, R. V., Aversa, R., Akash, B., Bucinell, R., Corchado, J., Apicella, A., & Petrescu, F. I. (2017d). Lockheed martin-a short review. Journal of Aircraft and Spacecraft Technology, 1(1).

Petrescu, R. V., Aversa, R., Akash, B., Corchado, J., Apicella, A., & Petrescu, F. I. (2017e). Our universe. Journal of Aircraft and Spacecraft Technology, 1(2).

Petrescu, R. V., Aversa, R., Akash, B., Corchado, J., Apicella, A., & Petrescu, F. I. (2017f). What is a UFO?. Journal of Aircraft and Spacecraft Technology, 1(2).

Petrescu, R. V., Aversa, R., Akash, B., Corchado, J., & Petrescu, F. I. T. (2017g). About bell helicopter FCX-001 concept aircraft-a short review. Journal of Aircraft and Spacecraft Technology, 1(2), 91-96.

Petrescu, R. V., Aversa, R., Akash, B., Corchado, J., Apicella, A., & Petrescu, F. I. (2017h). Home at airbus. Journal of Aircraft and Spacecraft Technology, 1(2).

Petrescu, R. V., Aversa, R., Akash, B., Corchado, J., Kozaitis, S., Abu-Lebdeh, T., ... & Petrescu, F. I. (2017i). Airlander. Journal of Aircraft and Spacecraft Technology, 1(2).

Petrescu, R. V., Aversa, R., Akash, B., Corchado, J., Apicella, A., & Petrescu, F. I. (2017j). When boeing is dreaming–a review. Journal of Aircraft and Spacecraft Technology, 1(3).

Petrescu, R. V., Aversa, R., Akash, B., Corchado, J., Apicella, A., & Petrescu, F. I. (2017k). About northrop grumman. Journal of Aircraft and Spacecraft Technology, 1(3).

Petrescu, R. V., Aversa, R., Akash, B., Corchado, J., Apicella, A., & Petrescu, F. I. (2017l). Some special aircraft. Journal of Aircraft and Spacecraft Technology, 1(3).

Petrescu, R. V., Aversa, R., Akash, B., Corchado, J., Apicella, A., & Petrescu, F. I. (2017m). About helicopters. Journal of Aircraft and Spacecraft Technology, 1(3), 204-223.

Petrescu, R. V., Aversa, R., Akash, B., Apicella, A., & Petrescu, F. I. (2017n). The modern flight. Journal of Aircraft and Spacecraft Technology, 1(4), 224-233.

Petrescu, R. V., Aversa, R., Akash, B., Apicella, A., & Petrescu, F. I. (2017o). Sustainable energy for aerospace vessels. Journal of Aircraft and Spacecraft Technology, 1(4), 234-240.

Petrescu, R. V., Aversa, R., Akash, B., Apicella, A., & Petrescu, F. I. (2017p). Unmanned helicopters. Journal of Aircraft and Spacecraft Technology, 1(4), 241-248.

Petrescu, R. V., Aversa, R., Akash, B., Apicella, A., & Petrescu, F. I. (2017q). Project HARP. Journal of Aircraft and Spacecraft Technology, 1(4), 249-257.

Petrescu, R. V., Aversa, R., Akash, B., Apicella, A., & Petrescu, F. I. (2017r). Presentation of Romanian Engineers who Contributed to the Development of Global Aeronautics–Part I. Journal of Aircraft and Spacecraft Technology, 1(4), 258-271.

Petrescu, R. V., Aversa, R., Akash, B., Apicella, A., & Petrescu, F. I. (2017s). A first-class ticket to the planet mars, please. Journal of Aircraft and Spacecraft Technology, 1(4), 272-281.

Petrescu, R. V., Aversa, R., Li, S., Bucinell, R., Kozaitis, S., Abu-Lebdeh, T., ... & Petrescu, F. I. (2017s). Electron dimensions. American Journal of Engineering and Applied Sciences, 10(2), 584-602.

Petrescu, R. V., Aversa, R., Kozaitis, S., Apicella, A., & Petrescu, F. I. (2017u). Deuteron dimensions. American Journal of Engineering and Applied Sciences, 10(3).

Petrescu, R. V., Aversa, R., Kozaitis, S., Apicella, A., & Petrescu, F. I. (2017v). Some proposed solutions to achieve nuclear fusion. American Journal of Engineering and Applied Sciences, 10(3).

Petrescu, R. V., Aversa, R., Kozaitis, S., Apicella, A., & Petrescu, F. I. (2017w). Some basic reactions in nuclear fusion. American Journal of Engineering and Applied Sciences, 10(3).

Petrescu, R. V., Petrescu, F. I., & Popescu, N. (2007). Determining gear efficiency. Gear Solutions.

Petrescu, R. V., Aversa, R., Apicella, A., Kozaitis, S., Abu-Lebdeh, T., Akash, B., & Petrescu, F. I. (2017y). Triton for nuclear fusion. American Journal of Engineering and Applied Sciences, 10(4).

Petrescu, R. V., Aversa, R., Apicella, A., & Petrescu, F. I. (2018a). Romanian Engineering'On the Wings of the Wind'. Journal of Aircraft and Spacecraft Technology, 2(1), 1-18.

Petrescu, R. V., Aversa, R., Apicella, A., & Petrescu, F. I. (2018b). NASA Data used to discover eighth planet circling distant star. Journal of Aircraft and Spacecraft Technology, 2(1), 19-30.

Petrescu, R. V., Aversa, R., Apicella, A., & Petrescu, F. I. (2018c). NASA has found the most distant black hole. Journal of Aircraft and Spacecraft Technology, 2(1), 31-39.

Petrescu, R. V., Aversa, R., Apicella, A., & Petrescu, F. I. (2018d). Nasa selects concepts for a new mission to titan, the moon of saturn. Journal of Aircraft and Spacecraft Technology, 2(1), 40-52.

Petrescu, R. V., Aversa, R., Apicella, A., & Petrescu, F. I. (2018e). NASA sees first in 2018 the direct proof of ozone hole recovery. Journal of Aircraft and Spacecraft Technology, 2(1), 53-64.

Petrescu, R. V., Aversa, R., Apicella, A., & Petrescu, F. I. (2018f). An Exoplanet has Smothering Stratosphere without Water. Relly Victoria Petrescu et al./Journal of Aircraft and Spacecraft Technology, 2, 65-71.

Petrescu, R. V., Aversa, R., Apicella, A., & Petrescu, F. I. (2018g). Structure of Buried Ice on Mars. Relly Victoria Petrescu et al./Journal of Aircraft and Spacecraft Technology, 2, 72-79.

Petrescu, R. V., Aversa, R., Apicella, A., & Petrescu, F. I. (2018j). Romanian Engineering'On the Wings of the Wind'. Journal of Aircraft and Spacecraft Technology, 2(1), 1-18.

Petrescu, R. V., Aversa, R., Apicella, A., & Petrescu, F. I. (2018k). NASA Data used to discover eighth planet circling distant star. Journal of Aircraft and Spacecraft Technology, 2(1), 19-30.

Petrescu, R. V., Aversa, R., Apicella, A., & Petrescu, F. I. (2018l). NASA has found the most distant black hole. Journal of Aircraft and Spacecraft Technology, 2(1), 31-39.

Petrescu, R. V., Aversa, R., Apicella, A., & Petrescu, F. I. (2018m). Nasa selects concepts for a new mission to titan, the moon of saturn. Journal of Aircraft and Spacecraft Technology, 2(1), 40-52.

Petrescu, R. V., Aversa, R., Apicella, A., & Petrescu, F. I. (2018n). NASA sees first in 2018 the direct proof of ozone hole recovery. Journal of Aircraft and Spacecraft Technology, 2(1), 53-64.

Petrescu, R. V., Aversa, R., Apicella, A., & Petrescu, F. I. (2018o). Modern propulsions for the aerospace industry. American Journal of Engineering and Applied Sciences, 11(2), 715-755.

Petrescu, R. V., Aversa, R., Apicella, A., Kozaitis, S., Abu-Lebdeh, T., & Petrescu, F. I. (2018p). Inverse kinematics of a stewart platform. Journal of Mechatronics and Robotics, 2(1), 45-59.

Petrescu, R. V., Aversa, R., Apicella, A., & Petrescu, F. I. T. (2018q). Total Static Balancing and Kinetostatics of the 3R Base Cinematic Chain. Journal of Mechatronics and Robotics, 2(1), 1-13. DOI: https://doi.org/10.3844/jmrsp.2018.1.13

Petrescu, R. V., Aversa, R., Apicella, A., & Petrescu, F. I. T. (2018r). Switching from Flat to Spatial Motion to 3R Mechatronic Systems. Journal of Mechatronics and Robotics, 2(1), 14-22. DOI: https://doi.org/10.3844/jmrsp.2018.14.22

Petrescu, R. V., Aversa, R., Apicella, A., & Petrescu, F. I. T. (2018s). The Dynamics of the Planar Cinematic Balanced Chain at the Plan Module 3R. Journal of Mechatronics and Robotics, 2(1), 23-34. DOI: https://doi.org/10.3844/jmrsp.2018.23.34

Petrescu, R. V., Aversa, R., Apicella, A., & Petrescu, F. I. T. (2018t). Dynamic Kinematics of the Plan Balanced Chain at the Planar Module 3R. Journal of Mechatronics and Robotics, 2(1), 35-44. DOI: https://doi.org/10.3844/jmrsp.2018.35.44

Petrescu, R. V. V. (2019a). Giant success for NASA when the InSight probe has reached "safety" on Mars. Journal of Aircraft and Spacecraft Technology. 3(1), 1-10.

Petrescu, R. V. V. (2019b). Mars Could have Enough Molecular Oxygen to Support Life. Journal of Aircraft and Spacecraft Technology, 3(1), 11-23.

Petrescu, R. V. V. (2019c). About Boeing X-32. Journal of Aircraft and Spacecraft Technology, 3(1), 38-54.

Petrescu, R. V. V. (2019d). China Launches Its First Passenger Aircraft. Journal of Aircraft and Spacecraft Technology, 3, 64-77.

Petrescu, R. V. V. (2019e). NASA and the Conquest of Cosmic Space by Man. Journal of Aircraft and Spacecraft Technology, 3, 78-91.

Petrescu, R. V. V. (2019f). 'Defiant', A Today Unique Helicopter in the World. Journal of Aircraft and Spacecraft Technology, 3, 92-106.

Petrescu, R. V. V. (2019g). The TESS Satellite Will Search for Planets in the Vicinity of Our Solar System. Journal of Aircraft and Spacecraft Technology, 3, 107-118.

Petrescu, R. V. V. (2019h). Boeing's Autonomous Military Aircraft. Journal of Aircraft and Spacecraft Technology, 3, 138-153.

Petrescu, R. V. V. (2019j). About Space Robots. Journal of Mechatronics and Robotics, 3(1), 1-32. DOI: https://doi.org/10.3844/jmrsp.(2019).1.32

Petrescu, R. V. V. (2019j). About Space Robots. Journal of Mechatronics and Robotics, 3(1), 1-32. DOI: https://doi.org/10.3844/jmrsp.(2019).1.32

Petrescu, R. V. V. (2019k). Medical Service of Robots. Journal of Mechatronics and Robotics, 3(1), 60-81. DOI: https://doi.org/10.3844/jmrsp.(2019).60.81

Petrescu, R. V. V. (2019l). Dynamics at Classical Distribution. Journal of Mechatronics and Robotics, 3(1), 82-101. DOI: https://doi.org/10.3844/jmrsp.(2019).82.101

Petrescu, R. V. V. (2019m). Time Factory. Journal of Mechatronics and Robotics, 3(1), 102-121. DOI: https://doi.org/10.3844/jmrsp.(2019).102.121

Petrescu, R. V. V. (2019n). About Robotics, Mechatronics and Automation that Help us Conquer the Cosmic Space. Journal of Mechatronics and Robotics, 3(1), 129-155. DOI: https://doi.org/10.3844/jmrsp.(2019).129.155

Petrescu, R. V. V. (2019o). Dynamic Models for Rigid Memory Mechanisms. Journal of Mechatronics and Robotics, 3(1), 156-183. DOI: https://doi.org/10.3844/jmrsp.(2019).156.183

Petrescu, R. V. V. (2019p). Something about a Railbound Forging Manipulator. Journal of Mechatronics and Robotics, 3(1), 184-207. DOI: https://doi.org/10.3844/jmrsp.(2019).184.207

Petrescu, R. V. V. (2019q). Face Recognition as a Biometric Application. Journal of Mechatronics and Robotics, 3(1), 237-257. DOI: https://doi.org/10.3844/jmrsp.(2019).237.257

Petrescu, R. V. V. (2019r). Contributions to the Synthesis of Fixed Axle Gears by Avoiding the Interference Phenomenon. Journal of Mechatronics and Robotics, 3(1), 280-300. DOI: https://doi.org/10.3844/jmrsp.(2019).280.300

Petrescu, R. V. V. (2019s). Space Probes. Journal of Mechatronics and Robotics, 3(1), 301-343. DOI: https://doi.org/10.3844/jmrsp.(2019).301.343

Petrescu, R. V. V. (2019t). Presents Some Aspects and Applications of Projective Geometry. Journal of Mechatronics and Robotics, 3(1), 389-430. DOI: https://doi.org/10.3844/jmrsp.(2019).389.430

Petrescu, R. V. V. (2019u). Mechanisms With Rigid Memory. Journal of Mechatronics and Robotics, 3(1), 431-470. DOI: https://doi.org/10.3844/jmrsp.(2019).431.470

Petrescu, R. V. V. (2019v). Internal Combustion Engines Forces. Journal of Mechatronics and Robotics, 3(1), 497-520. DOI: https://doi.org/10.3844/jmrsp.(2019).497.520

Petrescu, R. V. V. (2020a). British Airways is Ordering up to 42 Boeing 777-9s Aeronaves to Modernize the UK Flag Carriers Long-Haul Fleet. Journal of Aircraft and Spacecraft Technology.

Petrescu, R. V. V. (2020b). Presentation of Four-stroke Engine Design Elements. Journal of Mechatronics and Robotics, 4(1), 15-41. DOI: https://doi.org/10.3844/jmrsp.(2020).15.41

Petrescu, R. V. V. (2020c). Presents the Kinematics and Forces at a Basic Anthropomorphic Robot. Journal of Mechatronics and Robotics, 4(1), 42-73. DOI: https://doi.org/10.3844/jmrsp.(2020).42.73

Petrescu, R. V. V. (2020d). Presents the Kinematics of a Manipulator with Three Mobilities. Journal of Mechatronics and Robotics, 4(1), 85-105. DOI: https://doi.org/10.3844/jmrsp.(2020).85.105

Petrescu, R. V. V. (2020e). Nanobotics. Journal of Mechatronics and Robotics, 4(1), 136-155. DOI: https://doi.org/10.3844/jmrsp.(2020).136.155

Petrescu, R. V. V. (2020f). Mechatronic Systems to the Braking Mechanisms. Journal of Mechatronics and Robotics, 4(1), 156-190. DOI: https://doi.org/10.3844/jmrsp.(2020).156.190

Petrescu, R. V. V. (2020g). Fishing for “16 Psyche”. Journal of Aircraft and Spacecraft Technology, 4(1), 136-151. DOI: https://doi.org/10.3844/jastsp.(2020).136.151

Petrescu, R. V. V., Aversa, R., Akash, B., Apicella, A., & Petrescu, F. I. T. (2017z). Forces of a 3R Robot. Journal of Mechatronics and Robotics, 1(1), 1-14. DOI: https://doi.org/10.3844/jmrsp.2017.1.14

Petrescu, R. V. V., Aversa, R., Akash, B., Apicella, A., & Petrescu, F. I. T. (2017aa). Direct Geometry and Cinematic to the MP-3R Systems. Journal of Mechatronics and Robotics, 1(1), 15-23. DOI: https://doi.org/10.3844/jmrsp.2017.15.23

Petrescu, R. V. V., Aversa, R., Akash, B., Apicella, A., & Petrescu, F. I. T. (2017ab). Dynamic Elements at MP3R. Journal of Mechatronics and Robotics, 1(2), 24-37. DOI: https://doi.org/10.3844/jmrsp.2017.24.37

Petrescu, R. V. V., Aversa, R., Akash, B., Apicella, A., & Petrescu, F. I. T. (2017ac). Geometry and Direct Kinematics to MP3R with 4×4 Operators. Journal of Mechatronics and Robotics, 1(2), 38-46. DOI: https://doi.org/10.3844/jmrsp.2017.38.46

Petrescu, R. V. V., Aversa, R., Akash, B., Apicella, A., Kozaitis, S., Abu-Lebdeh, T., & Petrescu, F. I. T. (2017ad). Current Stage in the Field of Mechanisms with Gears and Rods. Journal of Mechatronics and Robotics, 1(2), 47-57. DOI: https://doi.org/10.3844/jmrsp.2017.47.57

Petrescu, R. V. V., Aversa, R., Apicella, A., Kozaitis, S., Abu-Lebdeh, T., & Petrescu, P. I. T. (2017ae). Geometry and Inverse Kinematic at the MP3R Mobile Systems. Journal of Mechatronics and Robotics, 1(2), 58-65. DOI: https://doi.org/10.3844/jmrsp.2017.58.65

Petrescu, R. V. V., Aversa, R., Apicella, A., Kozaitis, S., Abu-Lebdeh, T., & Petrescu, P. I. T. (2017af). Synthesis of Optimal Trajectories with Functions Control at the Level of the Kinematic Drive Couplings. Journal of Mechatronics and Robotics, 1(2), 66-74. DOI: https://doi.org/10.3844/jmrsp.2017.66.74

Petrescu, R. V. V., Aversa, R., Apicella, A., Kozaitis, S., Abu-Lebdeh, T., & Petrescu, P. I. T. (2017ag). The Inverse Kinematics of the Plane System 2-3 in a Mechatronic MP2R System, by a Trigonometric Method. Journal of Mechatronics and Robotics, 1(2), 75-87. DOI: https://doi.org/10.3844/jmrsp.2017.75.87

Petrescu, R. V. V., Aversa, R., Apicella, A., Kozaitis, S., Abu-Lebdeh, T., & Petrescu, P. I. T. (2017ah). Serial, Anthropomorphic, Spatial, Mechatronic Systems can be Studied More Simply in a Plan. Journal of Mechatronics and Robotics, 1(2), 88-97. DOI: https://doi.org/10.3844/jmrsp.2017.88.97

Petrescu, R. V. V., Aversa, R., Apicella, A., Kozaitis, S., Abu-Lebdeh, T., & Petrescu, P. I. T. (2017ai). Analysis and Synthesis of Mechanisms with Bars and Gears Used in Robots and Manipulators. Journal of Mechatronics and Robotics, 1(2), 98-108. DOI: https://doi.org/10.3844/jmrsp.2017.98.108

Petrescu, R. V. V., Aversa, R., Apicella, A., Kozaitis, S., Abu-Lebdeh, T., & Petrescu, P. I. T. (2017aj). Speeds and Accelerations in Direct Kinematics to the MP3R Systems. Journal of Mechatronics and Robotics, 1(2), 109-117. DOI: https://doi.org/10.3844/jmrsp.2017.109.117

Petrescu, R. V. V., Aversa, R., Apicella, A., Kozaitis, S., Abu-Lebdeh, T., & Petrescu, P. I. T. (2017ak). Geometry and Determining the Positions of a Plan Transporter Manipulator. Journal of Mechatronics and Robotics, 1(2), 118-126. DOI: https://doi.org/10.3844/jmrsp.2017.118.126

Petrescu, R. V. V., Aversa, R., Apicella, A., Kozaitis, S., Abu-Lebdeh, T., & Petrescu, P. I. T. (2018u). Inverse Kinematics of a Stewart Platform. Journal of Mechatronics and Robotics, 2(1), 45-59. DOI: https://doi.org/10.3844/jmrsp.2018.45.59

Petrescu, R. V. V., & Petrescu, F. I. T. (2020). About gateway. Journal of Aircraft and Spacecraft Technology. 4(1), 70-87.

Petrescu, R. V. V., Aversa, R., & Apicella, A. (2020). Structural colour from optical phenomena caused by interference with a thin or multilayer film, photonic nanocrystals, light scattering and diffraction grating effect. Journal of Aircraft and Spacecraft Technology. 4(1), 117-143.

Petrescu, R. V. V., Fontánez, M. K., Arango, J. C., Márquez, F. M., & Petrescu, F. I. T. (2020). Hydrogen for aircraft power and propulsion. International Journal of Hydrogen Energy, 45(41):20740-20764. DOI: 10.1016/j.ijhydene.(2020).05.253

Rahman, Z. A. (2018). On a New Equation for the Design and Development of Space Launch Vehicles. Journal of Aircraft and Spacecraft Technology, 2(1), 80-84.

Rana, S. (2020). Improved 3D Imaging Performance of AFM. Journal of Mechatronics and Robotics, 4(1), 8-14. DOI: https://doi.org/10.3844/jmrsp.(2020).8.14

Richmond, B. (2013). Kristian von Bengtson, Space Mission. https://www.vice.com/ro/article/4xdb5g/prima-misiune-cu-pilot-pe-luna-lui-jupiter-va-fi-planificata-prin-crowdsourcing

Riman, C. F. (2018). Multi-Controlled Wheelchair for Upper Extremities Disability. Journal of Mechatronics and Robotics, 2(1), 121-131. DOI: https://doi.org/10.3844/jmrsp.2018.121.131

Riman, C. F. (2019). Cheap Bluetooth Solution for Smart Controlled Home Devices. Journal of Mechatronics and Robotics, 3(1), 589-595. DOI: https://doi.org/10.3844/jmrsp.(2019).589.595

Saheed, A., Adeyinka O. M. A., & Zulikha, A-B. (2019). Access Control, Fire Prevention, and Surveillance Security System. Journal of Mechatronics and Robotics, 3(1), 563-570. DOI: https://doi.org/10.3844/jmrsp.(2019).563.570

Sharma, A., & Kosambe, S. (2020). Trajectory optimization for first human asteroid exploration mission. Journal of Aircraft and Spacecraft Technology. 4(1), 96-116. DOI: https://doi.org/10.3844/jastsp.(2020).96.116

Svensson, F., Hasselrot, A., & Moldanova, J. (2004). Reduced environmental impact by lowered cruise altitude for liquid hydrogen-fuelled aircraft. Aerospace Science and Technology, 8(4), 307-320.

Tumino, D. (2020). Mathematical formulation and numerical implementation of a finite element with anisotropic geometry. Journal of Aircraft and Spacecraft Technology. 4(1), 26-38. DOI: https://doi.org/10.3844/jastsp.(2020).26.38

Vladescu, I. (2020). The flying car exists. The US Air Force has successfully tested it. https://evz.ro/gata-masina-zburatoare-exista-us-air-force-a-testat-o-cu-succes.html?utm_source=onesignal&fbclid=IwAR3WWmFTIz_DBQAAwpWlDC3zsLJFaZ5KiKJsGx7vaiuCkx_2JTuOWn2YuSQ

Welabo, A., & Tesfamariamr, G. (2020). Trajectory Tracking Control of UR5 Robot Manipulator Using Fuzzy Gain Scheduling Terminal Sliding Mode Controller. Journal of Mechatronics and Robotics, 4(1), 113-135. DOI: https://doi.org/10.3844/jmrsp.(2020).113.135

Welch, H., & Mondal, S. (2019). Analysis of Magnetic Wheel Adhesion Force for Climbing Robot. Journal of Mechatronics and Robotics, 3(1), 534-541. DOI: https://doi.org/10.3844/jmrsp.(2019).534.541

Younes, T. M., Alkhedher, M. A., Soliman, A-H., & Al Alawin, A. (2019). Design and Implementation of Myoelectric Controlled Arm. Journal of Mechatronics and Robotics, 3(1), 552-562. DOI: https://doi.org/10.3844/jmrsp.(2019).552.562

Most read articles by the same author(s)

1 2 3 4 > >> 
فروشگاه اینترنتی