The maturity level of it management to support innovation within r&d centers in Brazil

Fabio Rodrigues da Silva; Eliane Antônio Simões; Marilia Macorin de Azevedo; Napoleão Verardi Galegale; Rodrigo da Silva Pinto; Romulo de Souza Fabricio Junior

doi:10.14807/ijmp.v7i1.374

PDF HTML

Published: Mar 1, 2016

DOI: https://doi.org/10.14807/ijmp.v7i1.374

Keywords:

innovation R&D center information technology maturity strategic planning

Fabio Rodrigues da Silva

CEETEPS, FATEC, FGV, ITA

Eliane Antônio Simões

CEETEPS - Centro Estadual de Educação Tecnológica Paula Souza - Unidade de Pós-Graduação, Extensão e Pesquisa / State Center For Technological Education Paula Souza – Post-Graduation, Extension and Research Department.

Marilia Macorin de Azevedo

CEETEPS - Centro Estadual de Educação Tecnológica Paula Souza - Unidade de Pós-Graduação, Extensão e Pesquisa / State Center For Technological Education Paula Souza – Post-Graduation, Extension and Research Department.

Napoleão Verardi Galegale

CEETEPS - Centro Estadual de Educação Tecnológica Paula Souza - Unidade de Pós-Graduação, Extensão e Pesquisa / State Center For Technological Education Paula Souza – Post-Graduation, Extension and Research Department / Pontifical Catholic University of Sao Paulo

Rodrigo da Silva Pinto

CEETEPS - Centro Estadual de Educação Tecnológica Paula Souza - Unidade de Pós-Graduação, Extensão e Pesquisa / State Center For Technological Education Paula Souza – Post-Graduation, Extension and Research Department.

Romulo de Souza Fabricio Junior

CEETEPS - Centro Estadual de Educação Tecnológica Paula Souza - Unidade de Pós-Graduação, Extensão e Pesquisa / State Center For Technological Education Paula Souza – Post-Graduation, Extension and Research Department.

صندلی اداری

Abstract

Innovation is an important factor for R&D centers, it is the goal to be achieved in the development of technological projects. IT plays a fundamental role in this process. This paper seeks to understand the maturity level of IT management to support innovation within R&D centers in Brazil.Innovation is an important factor for R&D centers, it is the goal to be achieved in the development of technological projects. IT plays a fundamental role in this process. This paper seeks to understand the maturity level of IT management to support innovation within R&D centers in Brazil.

Downloads

Download data is not yet available.

Issue

Vol. 7 No. 1 (2016): Independent Journal of Management & Production

Section

Articles

1. Proposal of Policy for Free Access Periodics

Authors whom publish in this magazine should agree to the following terms:

a. Authors should keep the copyrights and grant to the magazine the right of the first publication, with the work simultaneously permitted under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 that allows the sharing of the work with recognition of the authorship of the work and initial publication in this magazine.

b. Authors should have authorization for assuming additional contracts separately, for non-exclusive distribution of the version of the work published in this magazine (e.g.: to publish in an institutional repository or as book chapter), with recognition of authorship and initial publication in this magazine.

c. Authors should have permission and should be stimulated to publish and to distribute its work online (e.g.: in institutional repositories or its personal page) to any point before or during the publishing process, since this can generate productive alterations, as well as increasing the impact and the citation of the published work (See The Effect of Free Access).

Proposal of Policy for Periodic that offer Postponed Free Access

Authors whom publish in this magazine should agree to the following terms:

a. Authors should keep the copyrights and grant to the magazine the right of the first publication, with the work simultaneously permitted under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 [SPECIFY TIME HERE] after the publication, allowing the sharing of the work with recognition of the authorship of the work and initial publication in this magazine.

b. Authors should have authorization for assuming additional contracts separately, for non-exclusive distribution of the version of the work published in this magazine (e.g.: to publish in institutional repository or as book chapter), with recognition of authorship and initial publication in this magazine.

c. Authors should have permission and should be stimulated to publish and to distribute its work online (e.g.: in institutional repositories or its personal page) to any point before or during the publishing process, since this can generate productive alterations, as well as increasing the impact and the citation of the published work (See The Effect of Free Access).

d. They allow some kind of open dissemination. Authors can disseminate their articles in open access, but with specific conditions imposed by the editor that are related to:
   Version of the article that can be deposited in the repository:
   Pre-print: before being reviewed by pairs.
   Post-print: once reviewed by pairs, which can be:
The version of the author that has been accepted for publication.
The editor's version, that is, the article published in the magazine.
   At which point the article can be made accessible in an open manner: before it is published in the magazine, immediately afterwards or if a period of seizure is required, which can range from six months to several years.
Where to leave open: on the author's personal web page, only departmental websites, the repository of the institution, the file of the research funding agency, among others.

Author Biographies

Fabio Rodrigues da Silva, CEETEPS, FATEC, FGV, ITA

MSc student in Production Engineering at CEETEPS - State Center For Technological Education Paula Souza – Post-Graduation, Extension and Research Department. Lato sensu Post-Graduate in Software Engineering by ITA – Technological Institute of Aeronautics. Extension course in Corporate Management by BSP – Business School São Paulo, Brazil. Lato sensu Post-Graduate/MBA in E-business and International Executive MBA by FGV University - Brazil / OHIO University - USA. BsC in Computer Science / Data Processing Technology at FATEC - São Paulo Technology School, Brazil. IT Entrepreneur, start-ups co-founder, software engineer, team leader and IT consultant for more than 18 years.MSc student in Production Engineering at CEETEPS - State Center For Technological Education Paula Souza – Post-Graduation, Extension and Research Department. Lato sensu Post-Graduate in Software Engineering by ITA – Technological Institute of Aeronautics. Extension course in Corporate Management by BSP – Business School São Paulo, Brazil. Lato sensu Post-Graduate/MBA in E-business and International Executive MBA by FGV University - Brazil / OHIO University - USA. BsC in Computer Science / Data Processing Technology at FATEC - São Paulo Technology School, Brazil. IT Entrepreneur, start-ups co-founder, software engineer, team leader and IT consultant for more than 18 years.

Eliane Antônio Simões, CEETEPS - Centro Estadual de Educação Tecnológica Paula Souza - Unidade de Pós-Graduação, Extensão e Pesquisa / State Center For Technological Education Paula Souza – Post-Graduation, Extension and Research Department.

Civil Engineer, graduated from State University of Londrina in 1980, with a master degree in Transportation Engineering by Federal University of Rio de Janeiro in 1983, with a doctorate in Construction Management by State University of São Paulo in 1998 and post-doctorate in Distance Learning by University of São Paulo in 2010. She is now a Professor at Centro Estadual de Educação Tecnológica Paula Souza, as a coordinator of the Master Degree Program in Production Engineering. She is also a Consultant on Management and Education Areas in many organizations in Brazil.Civil Engineer, graduated from State University of Londrina in 1980, with a master degree in Transportation Engineering by Federal University of Rio de Janeiro in 1983, with a doctorate in Construction Management by State University of São Paulo in 1998 and post-doctorate in Distance Learning by University of São Paulo in 2010. She is now a Professor at Centro Estadual de Educação Tecnológica Paula Souza, as a coordinator of the Master Degree Program in Production Engineering. She is also a Consultant on Management and Education Areas in many organizations in Brazil.

Marilia Macorin de Azevedo, CEETEPS - Centro Estadual de Educação Tecnológica Paula Souza - Unidade de Pós-Graduação, Extensão e Pesquisa / State Center For Technological Education Paula Souza – Post-Graduation, Extension and Research Department.

PhD in Engineering from USP. Master in Quality from UNICAMP. Degree in Data Processing Technology from FATEC SP. Coordinated the Computer Centre in CEETEPS. It is permanent lecturer at the Postgraduate and Research Paula Souza Center Unit acts in Professional Master in Management and Technology in Production Systems and Professional Master in Management and Development of Vocational Education - both the State Center of Technological Education Paula Souza. She was deputy director, academic director of Colleges and CET Radial and Dean of its successor, the University Radial Center. Professor Institutions as FATEC SP, UNICID, FECAP, UNISANTANA, FMU and UNINOVE. Conducts research on Quality Management area, Engineering and Services Science, Strategic IT Management, Education Management and use of technologies in education. Responsible for Research Laboratory in Science of Services in CEETEPS - LaPCiS.PhD in Engineering from USP. Master in Quality from UNICAMP. Degree in Data Processing Technology from FATEC SP. Coordinated the Computer Centre in CEETEPS. It is permanent lecturer at the Postgraduate and Research Paula Souza Center Unit acts in Professional Master in Management and Technology in Production Systems and Professional Master in Management and Development of Vocational Education - both the State Center of Technological Education Paula Souza. She was deputy director, academic director of Colleges and CET Radial and Dean of its successor, the University Radial Center. Professor Institutions as FATEC SP, UNICID, FECAP, UNISANTANA, FMU and UNINOVE. Conducts research on Quality Management area, Engineering and Services Science, Strategic IT Management, Education Management and use of technologies in education. Responsible for Research Laboratory in Science of Services in CEETEPS - LaPCiS.

Napoleão Verardi Galegale, CEETEPS - Centro Estadual de Educação Tecnológica Paula Souza - Unidade de Pós-Graduação, Extensão e Pesquisa / State Center For Technological Education Paula Souza – Post-Graduation, Extension and Research Department / Pontifical Catholic University of Sao Paulo

Doctor of controlling and master in engineering from USP – São Paulo University. Professor and researcher at the Centro Paula Souza and PUC-SP. Business consultant with experience in engineering and management, with emphasis on Information Technology - IT, acting on the following topics: governance of IT, systems auditing, information security, risk analysis, ERP systems, business intelligence - BI, database, among others.

Rodrigo da Silva Pinto, CEETEPS - Centro Estadual de Educação Tecnológica Paula Souza - Unidade de Pós-Graduação, Extensão e Pesquisa / State Center For Technological Education Paula Souza – Post-Graduation, Extension and Research Department.

Team leader and software engineer for more than a decade, writing about technology, speaking at conferences, translating community content and most of the time coding. I believe in Lean and Agile principles to promote an effective, efficient and sustainable business culture. In academia, I have a Bsc degree in Information Technology, a postgraduate course in Programming Languages and in Business Administration and currently pursuing a master’s degree in Production Engineering.Team leader and software engineer for more than a decade, writing about technology, speaking at conferences, translating community content and most of the time coding. I believe in Lean and Agile principles to promote an effective, efficient and sustainable business culture. In academia, I have a Bsc degree in Information Technology, a postgraduate course in Programming Languages and in Business Administration and currently pursuing a master’s degree in Production Engineering.

Romulo de Souza Fabricio Junior, CEETEPS - Centro Estadual de Educação Tecnológica Paula Souza - Unidade de Pós-Graduação, Extensão e Pesquisa / State Center For Technological Education Paula Souza – Post-Graduation, Extension and Research Department.

B.S. in Law School from Federal University of Amazonas in 2004 and B.S. in Data Processing from University of the State of Amazonas in 1999. He is Master Degree candidate in Management and Technology in Production Systems at Centro Estadual de Educação Tecnológica Paula Souza in São Paulo in 2014. He has been working with research and development of technological projects since 2000 in partnership with firms, Research Institutes and Universities. Mr. Romulo has an interest in the field of innovation technology, management and culture of innovation, agile project management and virtual teams.B.S. in Law School from Federal University of Amazonas in 2004 and B.S. in Data Processing from University of the State of Amazonas in 1999. He is Master Degree candidate in Management and Technology in Production Systems at Centro Estadual de Educação Tecnológica Paula Souza in São Paulo in 2014. He has been working with research and development of technological projects since 2000 in partnership with firms, Research Institutes and Universities. Mr. Romulo has an interest in the field of innovation technology, management and culture of innovation, agile project management and virtual teams.

References

BERGERMAN, M. (2004) The role of innovation in wealth generation in Brazil: the example of the private technology innovation institutes. 3rd National Conference on Science, Technology, and Innovation, Brasília, DF, Brazil, p. 1333-1342.

CHESBROUGH, H. (2003) The Era of Open Innovation. MIT Sloan Management Review. Available at: http://sloanreview.mit.edu/article/the-era-of-open-innovation/ (Accessed date June 07 2014)

FABRICIO, R. S. F.; SILVA, F.; SIMOES, E.; AKABANE, G. K.; GALEGALE, N. V. (2014) As startups como formas de fortalecer o modelo de inovação aberta de um departamento de PeD em uma multinacional chinesa situada no Brasil. 21º. Workshop da ADPR. Estratégias, Infraestrutura e Redes Empreendedoras para o Desenvolvimento Regional, Lisboa, Portugal.

GARCIA-ALVAREZ, M. T. (2014) Analysis of the effects of ICTs in knowledge management and innovation: The case of Zara Group. Computers in Human Behavior, in Press.

GRIZENDE, E. (2012) Manual de inovação para empresas brasileiras de TIC: orientações gerais sobre inovação para empresas do setor de tecnologia da informação e comunicação. Rio de Janeiro.

HASHEN, I. A. T.; YAQOOB, I.; ANUAR, N. B.; MOKHTAR, S.; GANI, A.; KHAN, S. U. (2015) The rise of “big data” on cloud computing: Review and open research issues. Information Systems, n. 47, p. 98-115.

LEE, C.; WU, H.; PAO, H. (2014) How does R&D intensity influence firm explorativeness? Evidence of R&D active firms in four advanced countries. Technovation, n. 34, p. 582-593.

LINDIC, J.; BALOH, P.; RIBIÈRE, V. M.; DESOUZA, K. C. (2011) Deploying information technologies for organizational innovation: Lessons from case studies. International Journal of Information Management, n. 31, p. 183-188.

LINDKVIST, C.; STASIS, A.; WHYTE, J. (2013) Configuration management in complex engineering projects. Procedia CIRP, n. 11, p. 173-176.

MULYANTO. (2014) Performance of Indonesian R&D institutions: Influence of type of institutions and their funding source on R&D productivity. Technology in Society, v. 38, p. 148-160.

NAGANO, M. S.; STEFANOVITZ, J. P.; VICK, T. E. (2014) Innovation management processes, their internal organizational elements and contextual factors: An investigation in Brazil. Journal of Engineering and Technology Management, n. 33, p. 63-93.

NONAKA, I.; TAKEUCHI, H. (1995) The knowledge-creating company. How Japanese companies create the dynamics of innovations. Oxford University Press, New York.

OLDHAM, G. R.; SILVA, N. (2013) The impact of digital technology on the generation and implementation of creative ideas in the workplace. Computers in Human Behavior, in impression.

ORGANIZATION FOR ECONOMIC CO-OPERATION AND DEVELOPMENT (OCDE), (2005) Oslo Manual. Available at: http://www.oecd.org/innovation/inno/oslomanualguidelinesforcollectingandinterpretinginnovationdata3rdedition.htm (Accessed date: jun 05, 2014).

RAMPERSAD, G.; PLEWA, C.; TROSHANI, I. (2012) Investigating the use of information technology in managing innovation: A case study from a university technology transfer office. Journal of Engineering and Technology Management, n. 29, p. 3-21.

SAMPIERE, R. H.; COLLADO, C. F.; LUCIO, M. D. P. B. (2013) Metodologia de pesquisa. Translation: Daisy Vaz de Moraes. Penso, Porto Alegre.

TONELLI, A. O.; BERMEJO, P. H. S.; ZAMBALDE, A. L. (2014) Using the BSC for strategic planning of IT (Information Technology) in Brazilian organization. Journal of Information Systems and Technology Management, n. 11, p. 361-378.

XU, Y.; MALISETTY, M. K.; ROUND, M. (2013) Configuration management in aerospace industry. Procedia CIRP, n. 11, p. 183-186.

Article Sidebar

Main Article Content

Abstract

Downloads

Article Details

Fabio Rodrigues da Silva, CEETEPS, FATEC, FGV, ITA

Eliane Antônio Simões, CEETEPS - Centro Estadual de Educação Tecnológica Paula Souza - Unidade de Pós-Graduação, Extensão e Pesquisa / State Center For Technological Education Paula Souza – Post-Graduation, Extension and Research Department.

Marilia Macorin de Azevedo, CEETEPS - Centro Estadual de Educação Tecnológica Paula Souza - Unidade de Pós-Graduação, Extensão e Pesquisa / State Center For Technological Education Paula Souza – Post-Graduation, Extension and Research Department.

Rodrigo da Silva Pinto, CEETEPS - Centro Estadual de Educação Tecnológica Paula Souza - Unidade de Pós-Graduação, Extensão e Pesquisa / State Center For Technological Education Paula Souza – Post-Graduation, Extension and Research Department.

Romulo de Souza Fabricio Junior, CEETEPS - Centro Estadual de Educação Tecnológica Paula Souza - Unidade de Pós-Graduação, Extensão e Pesquisa / State Center For Technological Education Paula Souza – Post-Graduation, Extension and Research Department.

References

Similar Articles