Work routine management in operational units of an agro-industrial cooperative
Main Article Content
Abstract
The present work consists of analysis of the Work Routine Management development and implementation, in a process (register) of Operational Units in an Agro-industrial Cooperative, in order to use management tools that facilitate the identification of possible problems that hamper the results and their respective causes, and the execution of routine activities. The analysis consists of process mapping, creation and review of process indicators, as well as the definition of goals for monitoring and activating Routine Management. It also includes the survey of opportunities for improvement and the definition of an action plan in order to optimize the process for those involved, making it possible to act by monitoring the results obtained, tracing future actions and not only for correcting mistakes occurred during work routines.
Downloads
Article Details
1. Proposal of Policy for Free Access Periodics
Authors whom publish in this magazine should agree to the following terms:
a. Authors should keep the copyrights and grant to the magazine the right of the first publication, with the work simultaneously permitted under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 that allows the sharing of the work with recognition of the authorship of the work and initial publication in this magazine.
b. Authors should have authorization for assuming additional contracts separately, for non-exclusive distribution of the version of the work published in this magazine (e.g.: to publish in an institutional repository or as book chapter), with recognition of authorship and initial publication in this magazine.
c. Authors should have permission and should be stimulated to publish and to distribute its work online (e.g.: in institutional repositories or its personal page) to any point before or during the publishing process, since this can generate productive alterations, as well as increasing the impact and the citation of the published work (See The Effect of Free Access).
Proposal of Policy for Periodic that offer Postponed Free Access
Authors whom publish in this magazine should agree to the following terms:
a. Authors should keep the copyrights and grant to the magazine the right of the first publication, with the work simultaneously permitted under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 [SPECIFY TIME HERE] after the publication, allowing the sharing of the work with recognition of the authorship of the work and initial publication in this magazine.
b. Authors should have authorization for assuming additional contracts separately, for non-exclusive distribution of the version of the work published in this magazine (e.g.: to publish in institutional repository or as book chapter), with recognition of authorship and initial publication in this magazine.
c. Authors should have permission and should be stimulated to publish and to distribute its work online (e.g.: in institutional repositories or its personal page) to any point before or during the publishing process, since this can generate productive alterations, as well as increasing the impact and the citation of the published work (See The Effect of Free Access).
d. They allow some kind of open dissemination. Authors can disseminate their articles in open access, but with specific conditions imposed by the editor that are related to:
Version of the article that can be deposited in the repository:
Pre-print: before being reviewed by pairs.
Post-print: once reviewed by pairs, which can be:
The version of the author that has been accepted for publication.
The editor's version, that is, the article published in the magazine.
At which point the article can be made accessible in an open manner: before it is published in the magazine, immediately afterwards or if a period of seizure is required, which can range from six months to several years.
Where to leave open: on the author's personal web page, only departmental websites, the repository of the institution, the file of the research funding agency, among others.
References
ABPMP BPM CBOK™, V2.0. (2009) Guide to the Business Process Management Common Body of Knowledge.
ALEKSANDER, J.; ARMAND, F. (2013) Instruments and methods for the integration of company's strategic goals and key performance indicators. Kybernetes, v. 42 n. 6, p. 928–942.
ANDRADE, G. E. V.; MARRA, B. A.; LEAL, F.; MELLO, C. H. P. (2012) Análise da aplicação conjunta das técnicas SIPOC, fluxograma e FTA em uma empresa de médio porte. XXXII Encontro Nacional de Engenharia de Produção, Bento Gonçalves.
ANDRADE, J. C.; OLIVEIRA, V. M.; MOTA, H. C. M.; LOPES, E. M.; FONTÃO, H. (2008) Aplicação da análise SWOT para identificar oportunidades para o desenvolvimento econômico e social. XIII Encontro Latino Americano de Iniciação Científica e IX Encontro Latino Americano de Pós-Graduação – Universidade do Vale do Paraíba, São Paulo.
APPIO, J.; SCHARMACH, A. L. R.; SILVA, A. K. L.; CARVALHO, L. C.; SAMPAIO, C. A. C. (2009) Análise SWOT como Diferencial Competitivo: Um estudo exploratório na Cooperativa Muza Brasil. Revista Interdisciplinar Científica Aplicada, Blumenau, v. 3, n. 3.
BARBOSA, D. H.; MUSETTI, M. A. (2011) The use of performance measurement system in logistics change process: Proposal of a guide. International Journal of Productivity and Performance Management, v. 60, n. 4, p. 339-359.
BRACONI, J.; OLIVEIRA, S. B. (2009) Business Process Modeling Notation (BPMN). Editora Atlas, São Paulo.
BRAZ, R. C. F.; SCAVARDA, L. F.; MARTINS, R. A. (2011) Reviewing and improving performance measurement systems: An action research. International Journal of Production Economics. v. 133, n. 2. http://dx.doi.org/10.1016/j.ijpe.2011.06.003
CALDEIRA, J. (2012) 100 Indicadores da Gestão. 8. ed. Coimbra: Conjuntura Actual Editora SA.
CAMPOS, V. F. (2014) Qualidade Total: padronização de empresas. 2. ed. Editora Falconi, Minas Gerais.
CAMPOS, V. F. (2014) TQC: Controle da Qualidade Total (no estilo japonês). 9. ed Editora Falconi, Minas Gerais.
CAMPOS, V. F. (2013) Gerenciamento da Rotina do Trabalho do dia a dia. 9. ed. Editora Falconi, Nova Lima.
CARPINETTI, L. C. R.; GALDÁMEZ, E. V. C.; GEROLAMO, M. C. (2008) A measurement system for managing performance of industrial clusters: a conceptual model and research cases. International Journal of Productivity and Performance Management, v. 57, n. 5, p. 405-419.
CHIAVENATO, I. (2011) Introdução à Teoria Geral da Administração. 8. ed. Editora: Elsevier, Rio de Janeiro.
GALDAMEZ, E. V. C. ; COTRIM, S. L. ; GALVAO, E. M. ; CURSE, J. S. ; LEAL, G. C. L. ; BAIOCHI, S. F. (2016) Melhoria da Produtividade por meio do Mapeamento de Processo e Balanceamento da Produção: Impacto em uma Indústria de Vassouras PET. Revista SODEBRAS, v. 11, p. 154-159.
GALVÃO, E. M.; COTRIM, S. L.; LEAL, G. C. L.; ARAGAO, F. V. (2015) Sales Performance Management: a strategic initiative to the growth of micro and small enterprises. In: XXI ICIEOM- International Conference on Industrial Engineering and Operations Management, Aveiro.
GIL, A. C. (2008) Métodos e Técnicas de Pesquisa Social. 6. ed. Atlas S.A., São Paulo.
INSTITUTO FEDERAL DE EDUCAÇÃO, CIÊNCIA E TECNOLOGIA DA BAHIA. (2014) As organizações como um sistema. Avaliable: http://www.ifba.edu.br/professores/antonioclodoaldo/001%20SLIDES/1S%C3%8DNTESE_GR_SIPOC.pdf. Access em: 15/05/2016.
JOHNSON, G.; SCHOLES, K.; WHITTINGTON, R. (2007) Explorando a Estratégia Corporativa. 7 ed. Bookman, Porto Alegre.
KAUARK, F. S.; MANHÃES, F. C.; MEDEIROS, C. H. (2010) Metodologia da Pesquisa: Um guia prático. Editora Via Litterarum, Itabuna.
LAGES, P. G.; ZVIRTES, L.; BITTENCOURT, E.; ARAUJO, N. G. A. (2010) Implantação do Gerenciamento da Rotina do Trabalho do Dia-a-Dia em uma Empresa do Setor Moteleiro. XXX Encontro Nacional de Engenharia de Produção, 11f. São Paulo.
NAPPI, V.; ROZENFELD H. (2015) The Incorporation of Sustainability Indicators into a Performance Measurement System. Assembly Technology and Factory Management/Technische Universität Berlin.
PELISSARI, A. S. (2011) Management competence: a study in small companies of confections. Revista eletrônica adm. v. 17, n. 1, Porto Alegre Jan./Apr.
PIECHNICKI, F.; BARAN, L. R.; PIECHNICKI, A. S. (2012) Proposta de modelagem de um processo de manutenção industrial baseada no padrão BPMN e na norma ISA-95. XXXII Encontro Nacional de Engenharia de Produção. Bento Gonçalves, RS.
SALGADO, E. G.; SILVA, C. E. S.; MELLO, C. H. P. (2016) Reasons for Technology-Based Companies Contemplated By the First Company Program to Seek ISO 9001:2008 Certification. Independent Journal of Management & Production (IJM&P). v. 7. ISSN: 2236-269X; DOI: 10.14807/ijmp.v7i1.387.
UGOANI, J. N. N. (2016) Emotional Intelligence and Organizational Competitiveness: Management Model Approach Independent Journal of Management & Production (IJM&P). v. 7. ISSN: 2236-269X; DOI: 10.14807/ijmp.v7i3.427.
VOLPATO, F. B.; LEAL, G. C. L.; de SOUZA, F. A.; CARDOZA, E. (2011) Mapeamento de Processos: Um estudo de caso em uma Indústria de Produção de Fios Singelos. XXXI Encontro Nacional de Engenharia de Produção, 14f. Belo Horizonte.
WERKEMA, C. (2011) Lean Seis: Sigma Introdução Às Ferramentas do Lean Manufacturing. Editora Elsevier.
WERKEMA, C. (2014) Ferramentas Estatísticas Básicas do Lean Seis Sigma Integradas ao PDCA. Editora Elsevier.
YIN, R. K. (2015) Estudo de caso: planejamento e métodos. 5. ed. Editora Bookman. Porto Alegre.