Study of the plywood panels properties using geostatistic
Main Article Content
صندلی اداریAbstract
Plywood panels have multiple applications in construction, in the furniture industry and packaging. There is a need to improve techniques for assessing quality of these products. This paper proposed the use of geostatistics to evaluate the behavior of the of the plywood panel. The physical properties were analyzed (moisture content, density and water absorption) in the full extent of the plywood panel of Eucalyptus sp., bonded with adhesive single-component polyurethane. For analysis, three panels of five layers, with dimensions of 350 x 350 x 15.5 mm each, were employed. The tests were based on the standards EN 323-2000, EN 322-2000 and ABNT NBR 9486- 2011. Statistical modeling was performed using the R software, using the methodology of geostatistics. The average results were compared with values reported in the literature. The average water absorption was 7% higher in comparison with other studies, which used urea formaldehyde. So, the product can be applied only to interior and their use is not advisable for floors; the average moisture content and density were within the average values found in the literature. The behavior of the properties analyzed using the geostatistical model was not homogeneous, with large variations. Geostatistics was considered an appropriate tool for the study of the variability of the plywood panel properties, and can be applied for better quality control of them.
Downloads
Article Details
1. Proposal of Policy for Free Access Periodics
Authors whom publish in this magazine should agree to the following terms:
a. Authors should keep the copyrights and grant to the magazine the right of the first publication, with the work simultaneously permitted under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 that allows the sharing of the work with recognition of the authorship of the work and initial publication in this magazine.
b. Authors should have authorization for assuming additional contracts separately, for non-exclusive distribution of the version of the work published in this magazine (e.g.: to publish in an institutional repository or as book chapter), with recognition of authorship and initial publication in this magazine.
c. Authors should have permission and should be stimulated to publish and to distribute its work online (e.g.: in institutional repositories or its personal page) to any point before or during the publishing process, since this can generate productive alterations, as well as increasing the impact and the citation of the published work (See The Effect of Free Access).
Proposal of Policy for Periodic that offer Postponed Free Access
Authors whom publish in this magazine should agree to the following terms:
a. Authors should keep the copyrights and grant to the magazine the right of the first publication, with the work simultaneously permitted under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 [SPECIFY TIME HERE] after the publication, allowing the sharing of the work with recognition of the authorship of the work and initial publication in this magazine.
b. Authors should have authorization for assuming additional contracts separately, for non-exclusive distribution of the version of the work published in this magazine (e.g.: to publish in institutional repository or as book chapter), with recognition of authorship and initial publication in this magazine.
c. Authors should have permission and should be stimulated to publish and to distribute its work online (e.g.: in institutional repositories or its personal page) to any point before or during the publishing process, since this can generate productive alterations, as well as increasing the impact and the citation of the published work (See The Effect of Free Access).
d. They allow some kind of open dissemination. Authors can disseminate their articles in open access, but with specific conditions imposed by the editor that are related to:
Version of the article that can be deposited in the repository:
Pre-print: before being reviewed by pairs.
Post-print: once reviewed by pairs, which can be:
The version of the author that has been accepted for publication.
The editor's version, that is, the article published in the magazine.
At which point the article can be made accessible in an open manner: before it is published in the magazine, immediately afterwards or if a period of seizure is required, which can range from six months to several years.
Where to leave open: on the author's personal web page, only departmental websites, the repository of the institution, the file of the research funding agency, among others.
References
ALBINO, V. C. S. et al. (2015) Avaliação das propriedades físico-mecânicas de painéis compensados de Toona ciliata M. Roem. var. australis. Cerne, v. 17, n. 1, p. 103–108.
ALMEIDA, R. R. (2002) Potencial da madeira de clones do híbrido Eucalyptus grandis x Eucalyptus urophylla para produção de lâminas e manufatura de painéis compensados. Dissertation (Master in Forest Resources with option Technology Forest Products). Piracicaba: - Escola Superior de Agricultura Luiz de Queiroz, Universidade de São Paulo. Available: http://www.teses.usp.br. Access: 28 out.2008.
ARRUDA, L. M. et al. (2013) Estudo preliminar das propriedades de compensados produzidos com lâminas de paricá (Schizolobium amazonicum Huber ex Ducke) modificadas termomecanicamente. Revista Ciência da Madeira (Brazilian Journal of Wood Science), v. 3, n. 2.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS - ABNT. NBR-9486. Painéis de madeira compensada: determinação da absorção de água. Rio de Janeiro, 1986.
BORTOLETTO JÚNIOR, G. E. (2003) Produção de compensados com 11 espécies do gênero Eucalyptus, avaliação das suas propriedades físico-mecânicas e indicações para utilização. Scientia Forestalis, n. 63, p. 65-78. Disponível em: http://www.ipef.br/publicacoes/scientia. Acesso em: 21 de out. 2008.
BORTOLETTO JÚNIOR, G. E.; GARGIA, J. N. (2004) Propriedades de resistência e rigidez à flexão estática de painéis OSB e compensados. Revista Árvore, v. 28, n. 4, p. 563-570. Disponível em: http://www.scielo.br/scielo. php Acesso em: 21 de out. 2008.
CAMARGO, E. C. G. (1997) Desenvolvimento, implementação e teste deprocedimentos geoestatísticos (krigeagem) no sistema de processamento deinformações georreferenciadas (spring). Dissertation (Master in Remote sensing). São José dos Campos: INPE, Available: http://www.dpi.inpe.brteseseduardoapres.pdf. Acesso em: 26 out.2008.
DELFINER P.; DELHOMME, J. P. (1975) Optimum interpolation by kriging. In: DAVIS, J. D.; MCCULLAGH, M. J. (eds), Display and Analysis of Spatial Data. New York, John Wiley and Sons, p. 96-114.
EN 322:2000 Painéis derivados de Madeira. (2000) Determinação do teor de umidade. EuropeanStardard (versão portuguesa), Bruxelas
EN 323:2000 Painéis derivados de Madeira. (2000) Determinação da massa específica. European Stardard (versãoportuguesa), Bruxelas.
FERREIRA, D. F. (2013) Estatística computacional utilizando R. Universidade Federal de Lavras, Departamento de Ciências Exatas, 125 p.
Frihart, C. R. (2005) Wood adhesion and adhesives. In: ROWELL, R. M. ed. Handbook of wood chemistry and wood composites. Boca Raton, FL: Taylor & Francis. p. 215–278.
FRIHART, C. R.; HUNT, C. G. (2010) Adhesives with Wood Materials Bond Formation and Performance, in: Wood Handbook- Wood as an Engineering Material, Madison: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, cap. 10, p. 2-23.
IWAKIRI, S. (2005) Painéis de Madeira reconstituída. Curitiba: FUPEF, p. 247.
IWAKIRI, S.; MATOS, J. L. M.; FERREIRA, E. S.; PRATA, J. G.; TRIANOSKI, R. (2012) Produção de painéis compensados estruturais com diferentes composições de lâminas de Eucalyptus salignae pinus caribaea. RevistaÁrvore, v. 36, n. 3, p. 569-576.
KOLLMANN, F. F. P.; KUENZI, E. W.; STAMM, A. J. (1975) Principles of wood science and technology. Berlin: Springer-Verlag, v. 2. p. 703.
LIMA, J. S. S. et al. (2006) Estudo da viabilidade de métodos geoestatísticos na mensuração da variabilidade espacial da dureza da madeira de paraju (manilkara sp). Revista Árvore, Viçosa-MG, v. 30, n. 4, p. 651-657. Disponível em: http://www.revistaarvore.ufv.br php. Acesso em: 26 out.2008.
PETTER, R. R. H.; RESENDE, L. M.; ANDRADE JUNIOR, P. P. (2012) Comparative analysis on the adoption of innovation in furniture companies. Independent Journal of Management & Production, v. 4, n. 1, p. 111-125.
RIBEIRO JUNIOR, P. J. (1995) Métodos geoestatísticos no estudo da variabilidade especial de parâmetros do solo. Dissertation (Master) Piracicaba: Escola Superior de Agricultura Luiz de Queiroz, Universidade de São Paulo,
TOMASELLI, I. A. (1998) Indústria de painéis no Brasil e no mundo: tendências de mudanças do perfil de produção e usos. In: SEMINÁRIO INTERNACIONAL SOBRE PRODUTOS SÓLIDOS DE MADEIRA DE ALTA TECNOLOGIA, 1, Belo Horizonte-MG, Proceedings…Viçosa-MG: SIF/UFV/DEF, 1998. p. 55-64.
VICK, C. B. (1999) Adhesive bonding of wood materials. Forest Products Laboratory. Wood handbook–Wood as an engineering material. Gen. Tech. Rep. FPL–GTR–113. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. cap. 9, p. 199-222.
WATAI, L. T. (1987) Painéis derivados da madeira. São Paulo. ABPM (Associação Brasileira de Painéis de Madeira).